Tesi NELLI 16mm Blue Kill Switch

Play like the pros!  Easy to install and able to take rock n roll punishment.  Some guy named Eddie loved this switch.

Specs:

• Type: Momentary
• Push Button Switch Operation Type: Default Wired as Normally Open, Can also be Normally Closed
• Housing Material: Plastic
• Mounting hole size: 16mm Mounting Panel
• Thickness: .5mm-6mm
• Operation Pressure: about 3n
• Operation Stroke: 3mm LED Rated
• Voltage: 6V (includes wires to use with 9V battery and additional resistors in case you want to get creative with the wiring)    *note: This will also function with an 18v active electronics system. Please make a note on your order to make sure you get the right resistors.
• LED Life: About 40,000 hours
• LED Power Draw: 15mA
• Contact Resistance: 50 mOhm
• Mechanical Life: 1,000,000 cycles

Switch Rating: 3A/250VDC What does all this mean? You're getting a tough switch that will last a long time in your instrument and look good doing it! The switch is easy to install. If you have the slightest bit of skill with a soldering iron you can do it yourself. If you do not have that skill, you should have a guitar repair person do it.  

This package comes with everything:

(1) Tesi NELLI 16mm Momentary Guitar Kill Switch  

Tesi Quick-Connect wiring Bundle that includes:

(1) Black/Black ground wire

(1) Black/White hot wire

(1) White/Red Power wire with a resistor

(1) 9V Battery Harness with a resistor

(1) On/Off Rocker Switch

(1) Set of easy-to-follow wiring instructions

(2) Spare 270 Ohm resistors for custom wiring jobs When used with active pickups and/or a stereo output jack (not included) the Tesi NELLI does not require the included on/off rocker switch. 

Your project is our project!