Tesi POCO 12MM Momentary LED Push Button Guitar Kill Switch Purple/Purple
Specs:
- Type: Momentary Push Button Switch
- Operation Type: Normally Open (yes, this is correct for instrument kill switch operation. Included instructions show you how to wire it properly!)
- Housing Material: Anodized Zinc
- Mounting hole Size: 12mm
- Mounting Panel Thickness: 1mm-6mm
- Operation Pressure: about 5n
- Operation Stroke: 2.5mm
- LED Rated Voltage: 6V (includes wires to use with 9V battery and additional resistors in case you want to get creative with the wiring) *note: This will also function with an 18v active electronics system. Please make a note on your order to make sure you get the right resistors.
- LED Life: About 40,000 hours
- LED Power Draw: 15mA
- Contact Resistance: 50 mOhm
- Mechanical Life: 500,000 cycles
- Switch Rating: 2A/36VDC
The switch is easy to install. If you have the slightest bit of skill with a soldering iron you can do it yourself. If you do not have that skill, you should have a guitar repair person do it. The mounting hole is slightly larger than a standard volume or tone pot (12MM vs. 9MM) which means that if you decide to go back to your original setup, you don't have to buy a new pickguard or repair that hole in your wood.
This package comes with everything:
(1) Tesi POCO 12mm Momentary Guitar Kill Switch
(1) Tesi Quick-Connect wiring Bundle that includes:
(1) 8" Black/Black ground wire
(1) 8" Black/White hot wire
(1) 8" 9V Battery Harness with 330 ohm resistor
(1) On/Off Rocker Switch
(1) Set of easy-to-follow wiring instructions
(1) Spare 270 Ohm resistor for custom wiring jobs
When used with active pickups and/or a stereo output jack (not included) the Tesi POCO does not require the additional on/off rocker switch.
Each Tesi Guitar Kill Switch is guaranteed against defect for one year from the date of sale. Contact us for more details.
Your project is our project!